Our step-by-step guide and customer support team will ensure that you set up your IPTV and start watching over 5800+ channels immediately after your order!

1- Download VLC ( Download URL https://www.videolan.org/vlc/index.html)

2 – Open VLC Player

3- Go to Media -> Open Network stream.

4-  Add your Subscription URL we sent to you and press play

5- Wait till all the Channels load (this may take some time)

Choose a Channel and enjoy the show

Follow the following steps:

Go to the app store

Then Add M3U URL

Please follow all 14 steps 

1 – Open Perfect Player

2 – Go to Settings

3 – Now you are into Settings Page, Go to General

4 – Go to Playlist and enter Your URL and add by Name ALL IPTV after you done click on OK

5 – Go to EPG

6 – Enter your EPG URL after you done click on OK

7 – Go back to your Settings Page and go to Playback

8 – Check ONLY change system volume

9 – Go back to your Settings Page and go to GUI

10 – Check ONLY Show channels as group folder

11 – Restart Perfect Player

12 – Now you see channels list on the left side

13 – Press left the button on the remote controller now you have all channels on group folder

14 – Go to any folder and enjoy to watch all channels

How to Setup PVR IPTV Simple Client Kodi Krypton 17

Open KodiSelect TV

Select Enter add-on browser

Select PVR IPTV Simple Client

Select Configure

Select General

If you have your subscription m3u URL set Location to Remote Path

Then Select M3U PlayList URL

Enter the URL of your M3U PlayList and select OK

If you have an M3U text file stored locally on your network/computer/box then set the Location to Local Path (include Local Network)

Then Select M3U PlayList URL

Navigate to where the file is stored and select it

Select OK

Wait for notification of channels loaded

Now when you go back to the Home Screen and select TV it should look like this

KODI Version V16 or lower

STB Emulator

 
  1. Open Kodi
  2. Select SYSTEM
  3. Select TV (or Live TV if you are on a version lower than 15.2 and if you are then consider updating)
  4. Select General
  5. Select EnabledYou will now see a pop-up saying that you have no PVR Client enabled.
  6. Select OK
  7. Scroll down and select PVR IPTV Simple Client
  8. Select Enable
  9. Select Configure
  10. In General select M3U PlayList URL
  11. Add your M3U URL into the address section
  12. Select OK
  13. Select OK again
  14. Reboot Kodi
  15. On your Home Screen, you should now see TV (or Live TV if on an older version of Kodi).
  16. Open that to see the live channel list

This tutorial will guide you through the simple setup instruction for STB Emulator.
STB Emulator’ can emulate the following IPTV set-top boxes.

IPTV Set-top BoxSupport
MAG 200Yes
MAG 245Yes
MAG 250Yes
MAG 260Yes
MAG 270Yes
MAG 275Yes
Aura HDYes

STB Emulator Setup Instructions:

  1. Download ‘STB Emulator’ from the Google Play Store here.
  2. Install and Load the ‘STB Emulator’ app and you will see your ‘MAC address’ on screen.
  3. Tap near the ‘Top right corner’ and then click ‘Settings’ – the 4th icon from the right.
  4. Tap ‘Profiles’.
  5. Tap ‘Test portal’ to modify the existing profile or ‘Add profile’ to start a new one.
  6. Tap ‘STB Model’.
  7. Tap ‘MAG 250’ or whichever STB you wish to emulate.
  8. Tap ‘Portal settings’.
  9. Enter your ‘Portal URL’ (Check your activation e-mail) and click OK.
  10. Now tap ‘Screen Resolution’.
  11. Choose ‘1280×720’ (You can choose higher with internet speed 16+ Mbps).
  12. Exit the app and restart.
  13. You will now see your channel list.

Troubleshooting STB Emulator

If you have any problems viewing the Channels please follow this recommended fix:
Restart your App, Device/Box, and Wi-Fi Router.

Connect MAG DEVICE to TV and Internet. Then do as follows

  1. Go to: Settings—> System Settings —> Servers—>Portals
  2. Set Portal 1: IPTV Shop
  3. Set Portal 1 URL ( see your E-mail )
  4. Set Portal 2 Name leave this empty  add this only If you order the second subscription
  5. Set Portal 2 URL leave this empty  add this only If you order the second subscription
  6. Save everything
  7. Reboot device
  8. After the box is restarted, wait until the TV screen shows the channels.

This tutorial will guide you through the simple setup instruction for Dreamlink T1, T1+, T2, T6.

Obtaining MAC address from the device:

  1. Let the STB Boot Up.
  2. Finish any update that it may find.
  3. It will bring you to the ‘Server menu’.
  4. Press the ‘Exit’ button on the remote control and click on ‘OK’.
  5. This will bring you to the main DOL screen, the ‘MAC address’ is in the upper right corner.

Dreamlink T1, T1+, T2, T6 Setup Instructions:

  1. In ‘Dreamlink On Line (DOL) go to ‘Settings’.
  2. Press the ‘Green’ button on your remote control to pull up the ‘Edit’ option.
  3. Enter your ‘Portal name’ (use for example: ‘IPTV Shop’).
  4. enter your ‘Portal URL’ (Check your activation e-mail).
  5. Confirm, restart ‘Dreamlink’ and start watching.

Troubleshooting Dreamlink T1, T1+, T2, T6

If you have any problems viewing the Channels please follow this recommended fix:
Restart your Dreamlink and Wi-Fi Router.